The dynamic micro tillage machine is in the power of less than 7.5KW, is a machine with a small diesel or gasoline engine as power, and direct drive axle with axle driven rotary blade to rotary tillage of agricultural facilities, according to the hills, mountains, small plots, elevation, and inorganic tractor road design. It is suitable for sandy soil and economic plants to grow pine soil, middle tillage and weeding. It is suitable for field farming, ditching, ridging, plastic greenhouse, nursery, orchard, vegetable garden management, tea and other planting operations. It has light weight, small volume, simple structure, convenient operation, easy maintenance and low fuel consumption. High efficiency in production
1. Precautions before and in the early use of a micro tillage machine
A and micro cultivator before running, please run in the middle throttle no load for more than 12 hours, release the engine and chassis running in oil (after precipitation can be added to the chassis), clean the oil filter screen, add clean CD grade 40 diesel engine oil and then use it.
B and micro cultivator should not be overloaded at the initial stage of operation. They should be operated for more than 48 hours at medium and small loads, and replace the oil of engine and chassis.
C, after the closing period of the use, the oil is replaced once every 180 hours.
During D and cultivation, pay attention to cleaning the appearance of the machine to keep the heat of the machine.
Two. Attention and mark of fuel when fuel oil is added
A, plus 0 diesel.
B, add to 70% of the tank, and spilt the diesel when no tillage is done.
C, when the fuel is added to the engine, the engine must be flameout first.
D, when the fuel is added, the diesel filter can not be removed.
Three. Notice of adding lubricating oil and labeling of lubricating oil
A, engine and chassis part of the unified addition of CD40 or CC40 diesel engine oil, the chassis part should not be added gear oil.
B, check the oil quantity, the machine should be in the horizontal position.
C, using the dipstick check the amount of oil, do not rotate the dipstick, oil should be in position on the dipstick scale, can not exceed the scale is quite high.
Four. Precautions before the start of the micro tillage machine
A, in an empty position
B, check the engine and chassis oil quantity enough.
C, check whether there is fuel.
D, check whether the bolts of each part are loose.
E, start position, feet away from the tool, the feet do not in front of the tool, and pay attention to the machine can not stand.
Five. Precautions in the operation of micro tillage machine
Can't stand in front of A, farming machine.
B, do not keep things close to the rotary cutters when the machine is tilled.
C, when the machine is tilled with large stones or other obstacles, the clutch should be caught in advance so that the machine can be ploughed around later.
.
Six. Points for attention in the process of micro tillage surface transfer
A, when the engine is transferred, the engine must be flameout.
B, the engine must be transferred over the ridge flameout, don't let people in front of the machine to pull the machine over the ridge.
Seven. Attention to the use of reversing
A, must be used in small throttle
B, when the operation is unskilled, do not use the reverse gear.
C, when using the reverse gear, must pay attention to the position of the foot, not too close to the tool, while the hand slightly down the armrest.
D, farming in the paddy field carefully reverse gear.
Eight. Attention to the cleaning of the twine on the cutters of the micro tillage machine
A, the engine must be flameout when cleaning the twine on the cutters of the micro tillage machine.
B, do not use the hand to clean up the twine on the cutters of the micro tillage machine directly, and to clean up the metal objects such as the sickle.
Nine. How to correct the cleaning and maintenance of the air filter, the oil filter, the diesel filter
A, farming season must filter, filter cup class clean air filter, air filter cup must increase the amount of oil, can not add too much.
B, the engine must clean the oil filter when changing the oil.
C, after using 3~6 months, the diesel filter must be cleaned.
Ten. How to select the appropriate cutters for different cultivated land
A, deep ploughing hoe tool: suitable for deep ploughing, open land, but easily entangled grass.
B, * * * * water field wheel: suitable for all kinds of paddy fields, but not more than 45 centimeters.
C, dryland machete: suitable for various dryland tillage, but the soil moisture can not be too heavy.
D, the six roller knife: applicable field in the farming water heavier, more weeds.
Eleven, the maintenance method of the micro tillage machine for a long time unused
A, let off the diesel in the tank.
B, clean up the twine on the machine,
C, the engine, the chassis inside the engine oil, and clean clean, add clean oil.
D, clean the appearance of the machine.
E, pull the piston up to the stop.
